您当前的位置:>> 首页 > 产品中心 > 其它检测仪器 > 其它检测仪表 >> 阿美特克 APM CPF压力模块APM CPF APM CPF

产品搜索:
请在下列输入框内输入您要查找的产品名称。

产品目录
产品中心
打印 字体缩放

阿美特克 APM CPF压力模块APM CPF APM CPF的详细资料

阿美特克 APM CPF压力模块

APM CPF Advanced Pressure Module

    阿美特克 APM CPF压力模块                   

Your Multi-Purpose   Signal Calibrator

Now Measure Pressure!
THE CRYSTAL APM CPF SERIES pressure module, with integrated CPF 
female connection, offers the functionality and flexibility to perform 
pressure calibrations with a multifunction signal calibrator. In addition, 
when connected to a hand-held pressure calibrator, the APM can 
expand its pressure range.
The APM is engineered to deliver the same high level of accuracy 
whether in the lab or in the field. Combined with calibrators and pump 
systems, the Crystal APM is a powerful calibration tool.

Key Features
Accuracies to 0.025% of Reading. 
Performance to meet almost any calibration and measurement task.
>  Seven Ranges Available. 
Full coverage from vacuum to 15 000 psi /1000 bar.
> Rugged Construction. 
Machined aluminum housing. Engineered for rough field use–
almost unbreakable.
>  Self-Contained, Inligent Module. 
Calibration data is stored in the module, so any module can be combined with any compatible JOFRA indicator. No need to “calibrate” the 
module to an indicator.
Compatible with your existing JOFRA Calibrator
When combined with these JOFRA calibrators, the APM is a powerful calibration tool. 
ASC300/ASC301/ASC321/ASC-400/ASC-400

AMETEK APM CPF压力模块 Lab Accuracy in the Field

Active Temperature Compensation
Count on the same accuracy at any temperature, between -20 and 50° C.

Calibrate with Confidence Anywhere
Take measurements with up to 0.025% of reading accuracy. 
Crystal Engineering calibration facilities are A2LA accredited, (# 2601.01) 
which is internationally recognized by ILAC

Pressure Calibration with a Signal Calibrator
The Crystal APM converts a JOFRA ASC400 multifunction signal calibrator 
to a full-featured pressure calibrator. Seamlessly integrated with AMETEK 
pump systems, an APM combined with an ASC- 400 provides the benefits 
of a host of features like leak-test, pressure-switch calibration, scaling, 
% error calculation, and more!
    

A Specifications

Accuracy
30, 100 and 300 psi 
3, 10 and 30 bar
300 kPa, 1 and 3 MPa

0 to 30% of Range......±(0.0075% of Full Scale)
30 to 110% of Range....±(0.025% of Reading)
Vacuum.................For 100 psi / 10 bar / 1 MPa and lower:
±(0.06% of Full Scale*)
For 300 psi / 30 bar / 3 MPa:
±(0.06% of Full Scale*) ±1 LSD
* Full Scale = -14.5 psi / -1.0 bar /-100.0 kPa.
1000 and 3000 psi 
100 and 300 bar
10 and 30 MPa
0 to 30% of Range......±(0.015% of Full Scale)
30 to 110% of Range....±(0.05% of Reading)
10 000 and 15 000 psi 
700 and 1000 bar
70 and 100 MPa
0 to 30% of Range......±(0.03% of Full Scale)
30 to 110% of Range....±(0.1% of Reading)
Includes all effects of linearity, hysteresis, repeatability, temperature, 
and stability for one year.
All models indicate vacuum, but vacuum specification applies only where 
specified.
Not recommended for continuous use at high vacuum. Refer to XP2i-DP 
data sheet for gauges that are intended for continuous high vacuum use.
Sensor
Wetted Materials........(wrench tight) 316 stainless steel
(finger tight) 316 stainless steel 
and Viton® (internal o-ring)
Diaphragm Seal Fluid...Silicone Oil
Connection.............Crystal CPF Female
All welded, with a permanently filled diaphragm seal.
Metal to metal cone seal; O-ring can be removed if necessary.
1/4" male NPT adapter is included unless BSP, M20 or 15KPSI is specified.
1/4" medium pressure tube system is compatible with HIP LM4 and LF4 
Series, Autoclave Engr SF250CX Male and Female Series.
Output
Pressure Resolution.....up to 5 digits
Display update.........up to 10 per second
Pressure resolution is the maximum resolution available. 
The resolution of your JOFRA device may be different.
Communication
Connector..............5-pin LEMO
Serial...................9600 baud, 8 data, no parity, 1 stop
Protocol................ASCII command language
Pressure Overload
Overload Alarm.........“+OL” in display at 110% F.S.
Operating Temperature
Temperature Range.....-20 to 50° C (-4 to 122° F)
< 95% RH, non-condensing. No change in accuracy over operating 
temperature range. Gauge must be zeroed to achieve rated specification.
Applies to all modules.
Storage Temperature
Temperature Range.....-40 to 75° C (-40 to 167° F)
Enclosure
Dimensions.............1.4 x 1.4 x 3.0 in
(35.5 x 35.5 x 76.2 mm)
Weight. . . . . . . . . . . . . . . . . .0.51 lbs (231.0 g)

Accuracies, Ranges, and Resolutions

 

该产品由深圳市银飞电子科技有限公司提供,销售商地址位于深圳市南山区前海路振业国际商务中心1206。请您仔细阅读产品使用说明书,正确使用。

如果想试用该产品,请以下单位: 

 

银飞电子主要销通信设备、仪器仪表、电力设备、热工仪表、校准设备及工具配件。有多功能多产品校准器、电能功率校准器、活塞式压力计(气体、高压、液体、真空)、多功能电气安全校准器、示波器、频率计、万用表、阻抗分析仪、功率计、LCR数字电桥、音频分析仪、电容测试仪、电感测试仪、安规测试仪、直流电阻测试仪、网络分析仪、频谱仪、任意波形发生器、温度校准仪、数字测温仪、信号发生器、电源、电子负载、综合测试仪、信号源、滤波器测试仪、材料试验机、温度传感器、热像仪、变压器测试仪、噪声源、视频分析仪、过程校准仪、温度巡检仪、超级测温电桥、黑体炉、射频导纳物位开关、多点物位开关、音叉开关、射频导纳连续物位计、雷达液位计、超声波液位计、油中水含量分析仪、液位测量系统、磁致伸缩液位计、非接触固体雷达、压力传感器、过程表、压力变送器、气动控制器、高纯压力开关、隔膜片、冲液表、计量表膜片密封、材料实验机、食品质构仪、硬度实验机、数字测力计、PETPLUS特性粘度仪、布氏光学扫描系统、洛氏布硬度实验机、全自动显微硬度试验机、布氏硬度试验机、电动试验平台、单柱材料试验系统、双柱材料试验系统、浮球活塞压力计、船用温度压力校验仪、点位测量系统、超声波开关、油/水界面开关、在线流体检测开关、多点开关、平板开关、浮顶罐溢出保护开关、空气加热器、织物加热套、电加热带、硅橡胶加热毯、圆桶加热器、IBC加热器、气体加热器、灰斗加热系统、自限温电伴热带、恒功率电伴热带、恒功率电伴热带、覆套式电阻加热器、电阻丝、温度控制器、危险环境加热器及控制、复合材料修补仪、真空修补/处理平台、A320升降舵无损检验包;静电放电干扰模拟器、雷击浪涌干扰模拟器、周波跌落模拟器、辐射抗扰度系统、脉冲群干扰模拟器、传导抗扰度测试系统等仪器。

深圳市银飞电子科技有限公司
地址:深圳市福田区华强北街道华强北路38号赛格群星广场A座写字楼22楼2217

 

扫一扫

欢迎关注我们网站平台

联系我们

名称:深圳市银飞电子科技有限公司

客服电话:0755-23964199,86531914

E-mail:service@1001718.com

传真:0755-23964199

邮编:518052

Copyright © 2024-2025 深圳市银飞电子科技有限公司 版权所有网站地图 ICP备案号:粤ICP备15021421号
深圳市银飞电子科技有限公司 制作维护

0755-23964199
0775-86531914

微信扫一扫,给我发消息吧