Universal IV系列射频导纳连续物位计的详细资料

Universal IV系列射频导纳连续物位计

Overview The Universal IV™ Series is the fourth generation RF continuous system built on Drexelbrook’s 50 years of experience in level measurement. The product is backward compatible with the industry standard Universal III™, Univeral Lite™, Universal II™ and RCT™ Series and is the ideal solution for a wide array of applications. A few enhancements to the Universal IV Series include worldwide hazardous location approval, standard display/keypad, autoranging capabilities and state of the art stable and accurate measurement. Pro Model The Universal IV™ Pro model integrates the RF Admittance technology pioneered by Drexelbrook with the versatility of Cote-Shield™ technology that ignores coatings on the probe and measurement span of 1" to 800'. The Pro is compatible with a vast array of applications: conductive, insulating, and heavy or light coating. Lite Model The Universal IV™ Lite model is the entry level RF Capacitance measurement system without Cote-Shield™ capabilities. Lite models can be used in non-coating conductive liquids and insulated coating applications where Cote-Shield™ is not required. In addition, the Lite model offers a measurement range up to 20' typically.

Universal IV系列射频导纳连续物位计

Features and Benefits:

• Proven Drexelbrook level solution for the most common to the most challenging applications
• The most versatile level technology for liquids, slurries, interface and granules measurement
• Over 125 probe types for a wide array of applications, flex, rigid, wetted materials and process connections
• 2-wire, 4-20mA loop transmitter with the widely accepted digital HART protocol
• Process temperature from cryogenic to 1000°F (537°C)
• Process pressure from vacuum to 10,000 PSI (690 BAR)
• Measurement span as short as 1” (25mm) to 800 ft (244m), no dead zone or blocked measurement areas
• Proven Cote-Shield™ technology that ignores coating build-up on the probe
• Immune to vapor, dust and foam interference
• Immune to tank obstructions such as nozzles, ladders, pipes and agitators
• Low cost of ownership, no maintenance, and no moving parts to wear out
• Stable, repeatable, and accurate measurement within 0.25% of range
• Built-in isolation and surge protection for increased reliability
• Easy one-time calibration, configure it once and go
• Free PC-based HRTWIN™ configuration software for initial setup from anywhere on the loop or a handheld HART®communicator can be used
• Standard user friendly push-button LCD display for configuration and monitoring
• Integral and remote installation. The transmitter can be integrated with the probe, or for harsh environmental conditions it can be installed remoy away from the probe/vessel
• Worldwide approvals: FM, FMc, ATEX, IECEx and CE mark
• Hazardous location approvals, Intrinsic Safety (IS) and Explosion Proof/Flameproof for Class I, Div I, and Zone 0 installations
• Fully backward compatible with Drexelbrook’s leading products such as Universal III, Universal Lite and RCT series
• 50+ years of Drexelbrook applications knowledge that ensures the right solution for your application

Specs

Technology
RF Admittance / Capacitance

Supply Voltage
13-30VDC, 2-wire loop powered

Ouput/Digital Protocol
4-20mA, HART 
Compatible with HART®
HART device description available

Load Resistance
Maximum 550 ohms at 24 VDC
Minimum 250 ohms for HART protocol

Ambient Temperature
-40°C to 75°C  (-40°F to 167°F)

Process Temperature
-106°C to 815°C  (-160°F to 1500°F), probe dependent

Process Pressure
Vacuum to 1350 bar (20,000 psi), probe dependent

Process Connection
NPT, BSP, JIS, ANSI, DIN, Grayloc, Tri-Clamp, Perlick Fitting and more upon request

Main Wetted Parts
316L, PVDF, TFE, FEP, PFA, HasloyC, Monel and more depending on applications requirements. Consult factory

Sensor Length
1” to 800 Feet (25.4mm to 244m)
Probe, Pro and Lite model dependent

Capacitance Measurement Range
Autoranging  (6 ranges)
1-45,000 pF  (Pro model)
20-7,000 pF (Lite model)

Cote-Shield™
Pro model: Coating rejection with 100Khz or 15Khz and 45° phasing 
Lite model: 100Khz or 15Khz without phasing for insulating coating or conductive non-coating applications only

Integral or Remote Configuration
100 ft max cable length for remote configuration

Accuracy
0.25% of span (ranges 2-6)
Includes the effects of linearity, hysteresis and repeatability on electronics only

Response Time to Level Changes
350 msec nominal (no damping applied)
1-90 seconds programmable damping time

Supply Voltage Effect
0.2% of full scale max

Temperature Effect
0.5% per 100°F (37.7°C) change

Start-Up Time
< 12 seconds

Configuration and Calibration
Standard LCD display and keypad on all models
HRTWIN™ PC-based software 
Or third party Model 275, 375, 475 handheld communicator

Emission and Surge Protection
Compliant with IEC6100-4.2, 3, 4, 6, 8
Compliant with CISPR11 Group I, Class B

该产品由深圳市银飞电子科技有限公司提供,销售商地址位于深圳市南山区前海路振业国际商务中心1206。请您仔细阅读产品使用说明书,正确使用。

如果想试用该产品,请本单位:

银飞电子主要销售通信设备、仪器仪表、电力设备、热工仪表、校准设备及工具配件。有多功能多产品校准器、电能功率校准器、活塞式压力计(气体、高压、液体、真空)、多功能电气安全校准器、示波器、频率计、万用表、阻抗分析仪、功率计、LCR数字电桥、音频分析仪、电容测试仪、电感测试仪、安规测试仪、直流电阻测试仪、网络分析仪、频谱仪、任意波形发生器、温度校准仪、数字测温仪、信号发生器、电源、电子负载、综合测试仪、信号源、滤波器测试仪、材料试验机、温度传感器、热像仪、变压器测试仪、噪声源、视频分析仪、过程校准仪、温度巡检仪、超级测温电桥、黑体炉、射频导纳物位开关、多点物位开关、音叉开关、射频导纳连续物位计、雷达液位计、超声波液位计、油中水含量分析仪、液位测量系统、磁致伸缩液位计、非接触固体雷达、压力传感器、过程表、压力变送器、气动控制器、高纯压力开关、隔膜片、冲液表、计量表膜片密封、材料实验机、食品质构仪、硬度实验机、数字测力计、PETPLUS特性粘度仪、布氏光学扫描系统、洛氏布硬度实验机、全自动显微硬度试验机、布氏硬度试验机、电动试验平台、单柱材料试验系统、双柱材料试验系统、浮球活塞压力计、船用温度压力校验仪、点位测量系统、超声波开关、油/水界面开关、在线流体检测开关、多点开关、平板开关、浮顶罐溢出保护开关、空气加热器、织物加热套、电加热带、硅橡胶加热毯、圆桶加热器、IBC加热器、气体加热器、灰斗加热系统、自限温电伴热带、恒功率电伴热带、恒功率电伴热带、覆套式电阻加热器、电阻丝、温度控制器、危险环境加热器及控制、复合材料修补仪、真空修补/处理平台、A320升降舵无损检验包;静电放电干扰模拟器、雷击浪涌干扰模拟器、周波跌落模拟器、辐射抗扰度系统、脉冲群干扰模拟器、传导抗扰度测试系统、传导干扰测试系统、辐射干扰测试系统等仪器。